Tail Shafts

[salvarez]

Hi guys, thought i would share a contact with you all....

For Tailshaft Modifactions, Fabrications, Repairs or Balancing There is a place in Campsie which have never let me down!

They are called
A & L Drive Shafts
6/46 Elizabeth Street,
Campsie NSW
02 9787-1655

I have used them on numerous conversions i have done in the past for shortening or lengthening tail shafts
and they have always done a TOP job, their prices are also amazing!

I sent them the tail shaft from my T/A few weeks ago when i threw in a T700 and had to have it shortened,

They Shortened the shaft,
replaced BOTH Uni's,
Balanced and PAINTED!
For $220!!!

They are Korean but speak very FLuent engrish!!!........HAHAHAHAHaa.

[pmd400]

sounds like a good deal.
iv got a t700 in the shed. have u got it wired so that the torque converter locks up? the 1 iv got was apparently reco'd 20 000kms ago, i took the sump off and the solinoids arent even in it to lock up anyway.

[salvarez]

Yeah the lock-up has been eliminated on mine, and i'm running a 2500rpm slingshot stall convertor.
The kick down cable adjustment can be a real pain to get right though!.......